Quote:
Originally Posted by Maniac0908
Ya im gonna do this first and if need be ill power the fronts later. Ok last questions guys. Sorry.
Here is my 4 channel.
Should i use ch 1 and 2 only? Or split the rca to all 4 and use 1 underseat on ch 1/2 and the other on 3/4?
Also where should each of my settings knobs be at? The range. Like the lowest/highest for each. If i do use ch 3/4 should i turn bass eq off? Also what filter should be on?
Here is the 2 channel for my sub. Setting ranges for this?
Thanks again! |
I wouldn't use the 4 channel amp to power the sub. If you bridge 2 channels you need at least a 4 ohm load. So you would have to wire the sub at 8 ohms. That's not gonna be enough power.
The mrp m500 is not a 2 channel amp. It's a mono amp and it can handle the 2 ohm load.
Bass eq should be off.