Spent a few hours working on the car Saturday and Sunday.
Cut a bit more of the tunnel to get more room for shifter cable bracket.
Got the bellhousing tightened
Converter bolts tightened.
Shifter cable hooked up and working.
Put the new slip yolk on my driveshaft and it was around 30mm to long. So close but not close enough to work. I will look for some one in Australia or just go to DSS to get one.
So many little things that take so much time. 2 of the bellhousing bolts took over 2 hours for example.
Pretty happy the shifter is now hooked up.
Looking forward to making the transmission brace next week.
|