Quote:
Originally Posted by Technic
What system do you have? Logic7 or standard?
If it is Logic7, the remote wire is pin 13 in the back of your OEM HU/iDrive computer (there's no remote wire in the Logic7 amp harness). If the system is the standard, the remote wire is pin 10 (thin black wire) in the OEM amp harness.
You should use that OEM remote wire and nothing else if you want to keep full OEM functionality. Any other 12V source will not be synchronized with the way the OEM system handles the audio as well as this OEM remote.
|
I have a logic7 system so there is no remote wire on the amp harness DOH!
Where and what is the OEM HU/iDrive computer?
Thanks!