Well that would be the last thing as i find it very unlikely for both sensors to go at the same time. Plus, they are both well within translation with each other and voltage fluctuation seems ok.
I only have a simple OBD2 app that cannot export. I'm getting the cable now so i can run INPA.
STFT: +-3 on bank 1 - Idle
STFT: +-4 on bank 2 - Idle
STFT: +15 on bank 1 - 2500RPM
STFT: +22 on bank 2 - 2500RPM
On load, STFT will go up and LTFT will come down.
|