10NM or 7.3 ft/lbs
http://www.thectsc.com/images/pdf/6_...eplacement.pdf
It is such a small torque spec that, even with a torque wrench, some bolts were still too loose when re-using the pan bolts. So be careful and follow the pattern on the instructions.
I tightened it test drove the car, found leaks, re-tightened, and started the motor again, and found 1 more leak, then it was good to go.
New bolts could save a little time since they will bite with the right torque spec on the first try since they are new.
Have fun!
__________________
Current: 2019 G01 xDrive 3.0i X-Line Mineral White/Mocah Vernasca, Conv Pkg, Driver's Assist 1, Heated Steering Wheel, Navi, 19" Wheels
2014 F22 228i M-Sport, Moonroof Delete, Sensatec, 8-spd Steptronic, Cold Weather Pkg, Xenons