Quote:
Originally Posted by l8nit3
Thank you so much for the detailed reply!
indeed, my latency settings were wrong. Im hoping for a dry day this weekend to test out all the updated settings.
I have heard conflicting views on 'fast baud rate' setting. Using the K+Dcan cable (bimmergeeks) which would be best?
|
Check use fast rate. Unless you wish to go slower than is necessary.
Uncheck boot sector update. Out of an abundance of caution. Doesn't really matter since there is no boot sector file anyway.
Check or uncheck write UIF in comfort mode - up to you. If unchecked, WinKFP will not update the flash counter but will also won't update the UIF to reflect your updated ZUSB either.
Check or uncheck UIF write after data/program - up to you. Only matters for 'expert' mode, which you will not be using. 'Expert' mode means you manually chose the files for WinKFP to use. 'Comfort' mode means WinKFP chooses for you.
That's all I can remember off the top of my head.