View Single Post
      02-09-2012, 10:22 PM   #114
Brigadier General
yakev724's Avatar
Russian Federation

Drives: 11 Q5
Join Date: Jul 2010
Location: NYC

iTrader: (49)

Originally Posted by LuZar View Post
Hello friend! My name is Luciano and i'm from Brazil. I did everything like you, but it didn't work out. Do you know which wire from paddle have to connect to ground (#1 or #3)? Tks
Doesn't matter. One goes to ground, then when you pull the paddle, the 2 wires are shorted, and the second wire is temporarily grounded. This grounded signal goes down to the gearshift and changes the gears.

If you're using the same style paddles (LCI with black face), they need to first be opened and modified to work following the procedure described in the several threads on the forum here.

This is the procedure:

Good luck.