Quote:
Originally Posted by marconi118
the tab is the same, but the position (angular) is different.
centre both the 335i and m3 racks. the small arrow opposite to the tab on the plastic ring has to face to a mark on the rack frame.
then compare the position of the tabs, one will be 30° away compared the other.
Cut the tab so that the steering column can be inserted at a different angle than the one imposed from the tab.
|
gotcha! Just to confirm also. I can use both my inner/outer tie-rods from my E90 and out on M3? I measured mine and M3 rack and they are identical in length not including tie-rods.
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295