Quote:
Originally Posted by Impac
A/S Active Steering, VO Vehicle Order
1)Removed Active Steering Fuse in GloveBox or Module
2) Remove $217 from VO/FA and coded default KOMBI, SGM, SZL, this should clear the error if error is still there manually read KOMBI and set any AFS string to Nicht_Active
3) Than if you have DSC dash light AND YOU WILL lol, use WINKFP to flash EXPERT MODE use google for PDF
(BMW winkFp ExpertMode)
You can use RealOem to figure out the zb# or find someone without
$217 Active Steering or $216 Servotronic and use their DSC zb#
4) Than Just perform Steering Angle Calibration ista d or Tool32 and all good to good
|
Sorry for the simple question, how do you figure out the zb# from realoem ?
That is the DSC90.DAT file will latest ZUSB numbers:
It is clear that non AS and AS DSC has different HW number.
$ PS10INIT N00000000000000000000000020000000000000 D
$ VERSIONKFCONF: kfconf10.dat
;Zusbauvorschrift vom 21.08.2012 09:55
;SG-TYP: DSC90
;ZB-NR TYP-NR HW-NR IX SW-NR AM PIN S CS
4029563,0000000,4029563,A,0000000DA,0FFFFFFFFFD,00 0,1 Y
6776067,0000000,6776067,A,0000000DA,0FFFFFFFFFD,00 0,1 6
6776069,0000000,6776067,A,0000000DA,0FFFFFFFFFD,00 0,1 C
6775389,0000000,6775387,A,0000000DA,0FFFFFFFFFD,00 0,1 W
6791524,0000000,6791524,A,0000000DA,0FFFFFFFFFD,00 0,1 C
6862873,0000000,6862873,A,0000000DA,0FFFFFFFFFD,00 0,1 K
6775387,0000000,6775387,A,0000000DA,0FFFFFFFFFD,00 0,1 Q