Quote:
Originally Posted by Kevin_The_Clean1
Thank you man. I saw the upper spring perches / pads were the same exact part #. But, the lower spring perches / pads were not. So this confirms some last minute items I wanted to make sure about before ordering.
And I was fully aware about the M3 shocks being an absolute must back there. It was simply the spring pads I was concerned about.
Greatly appreciate your help!  |
Monroe upper mounts are 10mm and M3 are 12mm so that won't work. Unless you get a different cylinder sleve or you bore out the 10mm one to accept 12mm shaft. Did you knew that? ( I saw you were asking about the mounts on the other thread)