|
i did this before on a 1 series. now i cant remember exactly but i do know 100% the angels switch to a different pin in the light module as soon as you change the coding from halogen to xenon.
when i change the vo and coded the car the xenons worked fine byt it appeared as if the angels were dead. what i did was removed the plugs from the two plugs in the lights module then tested for 12v with the lights in the off position as the car had day running lights witch used the angels.
but yh 100% you need to swap some pins around for the angels to work following coding from halogen to xenons. hopes this helps
|