Quote:
Originally Posted by Ilyas
When I try to walk through menus E90 in INPA it throws errors about Language mismatch. But after clicking OK everything works fine.
|
I should have mentioned that in the DIY, INPA will display language variant and version mismatch errors. They can be ignored.
Because the latest INPA scripts are available in German metric only, the DIY preserves the English metric scripts (*.IPO files) from INPA 5.0.2.
The latest SP Daten files are German metric. Thus when you integrate the German metric SGBD ECU description files (*.PRG) and group files (*.GRP) from the SP Daten, the language variants do not match.
This INPA screen shot indicates that the SGBD files are in German:
Likewise, this EGS analog values screen confirms that the INPA scripts are English metric as the temperatures displayed are in Cecilius:
Where it would be of concern is if you were to mix English imperial INPA scripts with a German metric Daten. Values would not be displayed properly in INPA.