Quote:
Originally Posted by mississippiBMW
Hey guys,
A friend of mine wanted me to repair his OFHG on his 2008 328i. It appears that a previous owner worked on this....and broke off the corner of the mounting surface on the engine. I discovered this when removing the front bolt. The previous owner had repaired this corner with some type of putty/epoxy material.....possibly JB Weld or Belzona.
. |
Is that the picture from internet or the real one you are working on?
If latter, there seems to be enough left on the main part for the bolt head to hold on to. My guess that is why the epoxy was holding on. Keep it same, as long as bolt can hold on there and apply enough pressure to clamp the gasket it would be fine. If you think the leak was because of that bolt, that is a different matter.
If ain't broken don't fix it, if ain't broken that bad to fix it, still don't fix it
