View Single Post
      07-02-2019, 08:43 AM   #3
Run Silent
Run Deep
Run Silent's Avatar

Drives: Back and Forth To Work
Join Date: Mar 2017
Location: The Mountains

iTrader: (0)

Garage List
Originally Posted by BladeR1der666 View Post
OK, are there any bmw electrical gurus on here?
Interior blower stopped working just cut out, all fuses OK, fan regulator/resistor replaced, 12v feed direct to fan spins up freely, replaced ihka panel.... But still no fan whether in any speed temp or ac on/off..... Thoughts on anything else I can check 😭😭😭
See below.

Originally Posted by Mij007 View Post
is your car part of the recall for the blower fan ?
^This. Many E9X chassis are under recall to replace the wiring between the blower motor and final stage unit. If yours is not part of the recall (you can look it up online via your VIN), then it is probably the entire final stage unit that has gone bad. This part is pretty cheap (about $60 for the Valeo one) and is an easy DIY for anyone with basic hand tools. Takes about 45min to replace and there are tutorials here on the forums.
Don't sweat petty things....or pet sweaty things.