[xttenza]

Hello again,
So.. I tried a disable rear brake light checks, I also try change a rear lights disable with parking lights (but I don't know If options is correct what I disabled) and without any change, I also try a delete a short circuit and remove all error with INPA but any change. What I didn't try is change a PINs but whichone and why? I think maybe helps change a PWM but which...

And last question what is difference betwen
KALTUEBERW_RL_BL_2_L and KALTUEBERW_RL_BL_1_L


KALTUEBERWACHUNG_BLK_H_L
nicht_aktiv
KALTUEBERWACHUNG_BLK_H_R
nicht_aktiv
KALTUEBERW_RL_BL_2_L
nicht_aktiv
KALTUEBERW_RL_BL_2_R
nicht_aktiv
WARMUEBERWACHUNG_BLK_H_L
nicht_aktiv
WARMUEBERWACHUNG_BLK_H_R
nicht_aktiv
WARMUEBERW_RL_BL_2_L
nicht_aktiv
WARMUEBERW_RL_BL_2_R
nicht_aktiv

Warm test Brake
WARMUEBERWACHUNG_BL_MI -> nicht_aktiv

Cold Test Brake
KALTUEBERWACHUNG_BL_MI -> nicht_aktiv

Warm test turn
WARMUEBERWACHUNG_BLK_HI -> nicht_aktiv

Cold test turn
KALTUEBERWACHUNG_BLK_HI -> nicht_aktiv

cold rear turn signal...
KALTUEBERWACHUNG_BLK_H -> nicht_aktiv

cold brake light.....
KALTUEBERWACHUNG_BL -> nicht_aktiv

warm rear turn signal...
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

warm brake light..
WARMUEBERWACHUNG_BL -> nicht_aktiv

Brake force display
CC_MELD_BFD_BL -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_L -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_R -> nicht_aktiv

-------------------------------------------------------


NFRM

KALTUEBERWACHUNG_BLK_H -> nicht_aktiv

[[Cold Test Brake Light]]
KALTUEBERWACHUNG_BL -> nicht_aktiv

[[Warm Test Blinker Rear]]
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

[[Warm Test Brake Light]]
WARMUEBERWACHUNG_BL -> nicht_aktiv

[[Cold Test Brake Force Display]]
KALTUEBERWACHUNG_BFD <--Cold BFD test

[[Warm Test Brake Force Display]]
WARMUEBERWACHUNG_BFD <--Warm BFD test



Thanks


EDIT:
And error check with rear brake light is still appear... :-) I don't understand how it is possible