I will give a shot right away Thank you
Ok. I got the following Errors after trying to reach out the Calibration. I think without JBE3 swap no way to reach this module.
Quote:
Originally Posted by Dubstar
To be able to access the camera with INPA you have to go to
C: / EC-APPS / INPA / CDGDAT /
edit the appropriate file for his vehicle series
1 series = E87.GER / ENG,
3 series = E90.GER / ENG.
GER if INPA is in German
ENG if INPA is in English.
Open it with a text editor and add the entry
"ENTRY= RFK_70, Rückfahrkamera-System," to "KAROSSERIE", then you can select and calibrate the camera in INPA under your vehicle class.
For the Englisch file it's called "RFK_70, Rear Driving Camera System TFK_70,"
Save and Calibrate
JBE swap is PnP. It's only the ECU not the complete Fusebox.
FRM3 is not necessary for camera.
|