Quote:
Originally Posted by HP Autowerks
I recommend using all bolts with no studs. Otherwise the studs will not clear the cowling.
|
I haven't yet removed the cowling on my car...
Does the stock 335i setup use a bolt?
According to the realoem diagram, there are two part numbers for no. 6:
ASA-BOLT WITH CIRCLIP (M12X1.5X39) qty 1
&
TORX BOLT (M10X16-10.9-) qty 2
...It doesn't look like the mount itself is fastened with 3 bolts, but that might just be the picture. In any case, both parts appear to bolts. Are these what I need to mount this on a 335 and still clear the plastic cowling?
Lastly, should this be installed while the car is in an allignment machine?