View Single Post
      12-18-2016, 10:28 PM   #2
Socket
Lieutenant General
Socket's Avatar
Australia
2920
Rep
10,701
Posts

Drives: 335i
Join Date: Nov 2014
Location: Melbourne

iTrader: (4)

Garage List
2008 BMW E92  [0.00]
First step is to remove the bolts holding the front bumper in place

There are 1 - 12 bolts under the front lip of the bumper (depending on how many you have lost). Lie on the ground and remove them using a 8mm socket

With them out of the way, next we need to remove the 8mm hex bolts behind the wheel arches, that holds the top corners of the bumper to the side panels
Once again use a 8mm socket on an extension to reach them. Also may need a flashlight as its quite dark inside the wheel arch
Attached Images
    

Last edited by Socket; 12-19-2016 at 12:17 AM..