[LMB335IS]

Originally Posted by porsche959

thanks. how are you powering the cluster without plugging into the car? there are alot of pins - hard to tell which is power/ground.

Also, are you using a 12V power source and wires similar to this?
https://www.ebay.com/itm/Universal-1...348:rk:25:pf:0

The bottom 2 pins are power and ground. If you look at the connector (car side) closely it will be numbered on both sides. You should see a 1 and 9 on one side and a 10 and 18 on the other. Nine (red/blue stripe) is power, 18 is ground (brown/black stripe). newTIS.info is a great resource for wring, pinouts, schematics, etc.

I was lucky enough to find spare connector in a local junkyard that I wired up just for this. Unfortunately I don't think the connector is available separately, at least I couldn't find a place that sells it.