Quote:
Originally Posted by salpone
I have a series E 92 but 320d
the problem I have at the rear wheel is:
- my handbrake drum has an internal diameter of 160mm, so with disc for series 3 I go well for the handbrake ............... ..... disk height is 66mm and it's not good because I have to bring the Msport plier out more, right?
[img] https://i.postimg.cc/fyxNV8PZ/SGPhot...8-08-45-26.jpg[/img]
- not to put the Msport caliper forward, I have to mount the E60 series 5 disc, which has a disc height of 63mm and that's fine, but it has the 180mm handbrake drum, so my handbrake drum .... .do not brake.
[img] https://i.postimg.cc/wx0KGsdw/SGPhot...8-08-54-12.jpg[/img]
what better solution?
. do I make a bush and do I make the E60 disc drum from 180 to 160 small?
- Do I take a danzas and take the caliper outwards and mount E9x disc?
thank you |
Thats an easy fix, I spaced them out by welding on new larger shoes. I did this to mine a long time ago. Look 10-15 pages back on this thread and you will see picture/link. If your offset is pretty small, you can leave it or use spacers like you said. Also better to upsize drum shoes, so you have more disc options come replacement time.