[808AWD325xi]

Originally Posted by AWSAWS

Please,please,please,please,please! Can anyone help me figure out how to reset the DCT transmission (adaptations) using INPA?

I don't want to use the holding down the throttle method.

I get these 3 options and can't read any of them?

http://postimg.org/image/waqq2d2u5/

I have the V54 datens installed.

You can reset the GS40 adaptation values with Tool32. (C:\EDIABAS\ECU\DKG_90.PRG):

	<JOB>
		<JOBNAME>STEUERN_ADAPTION_ZURUECKSETZEN</JOBNAME>
		<JOBCOMMENT></JOBCOMMENT>
		<JOBCOMMENT>Adaptionswerte Zurücksetzen</JOBCOMMENT>
		<JOBCOMMENT>( Service ID 0x30, Identifier 0x04 )</JOBCOMMENT>
		<JOBCOMMENT>Voraussetzung für ordnungsgemäße Funktion ist, dass</JOBCOMMENT>
		<JOBCOMMENT>man in Anschluss die Zündung abschaltet und den</JOBCOMMENT>
		<JOBCOMMENT>Steuergeräte-Abfall abwartet, damit die Defaultwerte</JOBCOMMENT>
		<JOBCOMMENT>im NVRAM abgespeichert werden.</JOBCOMMENT>
		<ARG>
			<ARGNAME>ADAPTIONSWERT</ARGNAME>
			<ARGTYPE>int</ARGTYPE>
			<ARGCOMMENT>Eingebe des Hexwertes</ARGCOMMENT>
			<ARGCOMMENT>0xA0 = Adaptionswerte Kisspoint K1</ARGCOMMENT>
			<ARGCOMMENT>0xA1 = Adaptionswerte Kisspoint K2</ARGCOMMENT>
			<ARGCOMMENT>0xA2 = Adaptionswerte Kupplungsmomentenkennlinie K1</ARGCOMMENT>
			<ARGCOMMENT>0xA3 = Adaptionswerte Kupplungsmomentenkennlinie K2</ARGCOMMENT>
			<ARGCOMMENT>0xB1 = Adaptionswerte für DRM</ARGCOMMENT>
			<ARGCOMMENT>0xB2 = Adaptionswerte des Semischlupfs für Gänge 1-7</ARGCOMMENT>
		</ARG>

Originally Posted by AWSAWS

Thanks mate. Some people on other forums who have flashed their transmissions to different versions think there aren't any DCT modules and that Bav. Tech is probably the only current method.

They are wrong...