View Single Post
      11-07-2018, 08:20 PM   #2487
RSL
Captain
647
Rep
779
Posts

Drives: E92 ///M3 (Retired) / 335is
Join Date: Mar 2012
Location: USA

iTrader: (6)

Quote:
Originally Posted by pjr710 View Post
Here's two more, I can make 30FF happen like clockwork and it's always around my pedal position .. once I go to 99% I can make that 30FF bell ring. What's interesting is that I can see my throttle opens at 81 even at 61% pedal position.

Here's a 3rd gear pull under partial pedal down position .. with no 30ff
https://datazap.me/u/pjr710/3rd-gear...-9-15-19-23-25

Here's my 3rd gear pull with full pedal down position. 30FF happened probably right when the boost starts dropping:
https://datazap.me/u/pjr710/3rd-gear...-9-15-23-24-25
Do you have the flasher module or just monitor? It's using the ZB number instead of rom family, which is an indication the rom isn't a variant directly supported by MHD and needs to be updated first. It's probably why you have odd parameters names for logging. I'd back up and save the rom that's currently in the DME, keep it in a safe place and then let MHD update the rom to one that works with it.

As for your logs, you have 0 PID activity at WOT after spool mode ends. For the part-throttle one, PID remains active. You should still have enough WGDC base at WOT to make boost, so there may still be a leak somewhere or something up with the BCS. Some other things look odd with PID, but get your rom/monitoring sorted before screwing with the WGs. Unless the rods were physically moved before or the flapper(s) themselves are messed up, they're not the source of your boost problems.
Appreciate 0