Quote:
Originally Posted by the ocho
Just got the xHP tune for my gearbox and wanted to try this as well since the needle is quite slow. This is what Tool32 returned:
Code:
apiJob("KOMB87","codierdaten_lesen","0x3103","")
Satz : 0
OBJECT = komb87
SAETZE = 1
JOBNAME = codierdaten_lesen
VARIANTE = KOMB87
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
JOB_STATUS = OKAY
CODIERDATENBLOCK = 23 Bytes
0000 : 16 33 00 33 00 DE 07 9D 0D 5D 13 48 15 00 00 97 .3.3.. .].H...?
0010 : 06 8A 0B 7C 10 22 12 .?.|.".
_TEL_ANTWORT = 30 Bytes
0000 : 9A F1 60 62 31 03 16 33 00 33 00 DE 07 9D 0D 5D ?`b1..3 .3...]
0010 : 13 48 15 00 00 97 06 8A 0B 7C 10 22 12 4B .H...?.? .|.".K
Something must be off since the needle dampening already is set to 0... Am I interpreting the data correct? 
Also, the code suggest minimum and maximum values of "33" which can't be right... |
What vehicle do you have, also can you upload a photo of this KOMBI.