|
Update, ive got the car started.
There are two wires comming from the jump terminal under the hood. The 10mm terminal had 12.5v and the 13mm terminal had 1.4v.
Unbolted the thick wire and bolted it to the thin one.
Car starts up.
But i dont want to burn my DME power supply.
So currently the car is sitting with the battery unhooked. and the starter cable unbolted.
Any suggestions?
Ps. The 13mm terminal tested to have 11.7v once the starter cable was unhooked, contacting the starter cable to the terminal caused the voltage to drop to 1.4v
Any suggestions?
|