Quote:
Originally Posted by neilvan
INPA loads up and shows battery ON and Ignition ON. No errors with INPA.
In NCS expert the error happens in the connection process after selecting CAS. Will double check FRM and NFRM lead to the same result. I will also do the error log right after.
Will clearing the MAN file before as well.
Versions are INPA V5.0.6, NCSexpert V4.0.0 and Ediabad V7.3.0.
|
It's a communication problem with ncs expert. I'd try loading nfrm instead of CAS and see if that does anything. If not, try disconnecting the jb4 red power wire. I've had 2 instances where turning jb4 to map 0 still didn't allow me to fully communicate with car and I had to disconnect the red power wire. This could be one of those instances. Could also be a faulty ncs expert download, positive com port is set to 1 and latency set to 1?