Quote:
Originally Posted by nick380
Not quite that easy, you do need the AT harness for the DSC module. I had trouble with this while programming as the ground the DSC module was not plugged in on the AT harness side. Depending on the year you may need to do some additional wiring if you don't have the wires going from DME to Clutch switch module and CAS to Clutch switch module. Reverse light should have its own connector on the manual trans harness and shouldn't require additional wiring. I'll have to look at my Bentley Manuel again to check the wiring specifics.
|
The DSC? that thing next to the master cylinder? it'd be nice if i could speak to you via text and shoot you pics instead of here loading pics here sucks
505 333 5389
__________________
2008 335i FFTEC ST 6266,), Boostbox, VRSF 3.5 exhaust, mtech front and rear, KWVll, APEX 18x9.0, 18x12= 305/35/18 NTO1s, BMS OCC, Rb PVC, M3 tri-color stitched S-wheel,MT SWAPPED, M3 LSD diff
2008 135i mods coming soon!