Quote:
Originally Posted by HeavyMetalRocker
Quote:
Originally Posted by Tiago@VRSF
I'd go with about 2 feet and cut it short, you'll also want a 1/4" to 1/8" adapter for your OEM CP hose. It's best to just cut the hose off at the nipple rather than trying to pull the existing hose off the nipple since the intake mani is very brittle.
|
Do you run it straight to the mani? What about that little T piece, I thought the other vacuum line went to something important??
|
Here's what I did. I used a 1/8 npt to an -4 (1/4"). but you can just tap a nipple instead. I found this to be the best and easiest place. Just make sure you leave enough room for the evap hose
https://www.dropbox.com/s/1kqgvd6rnb...2012.55.01.jpg