**UPDATE**
I did some more reading and found out about the 7&8 pin connection. Mine were soldered together. I pulled out my soldering gun and removed the bridge between the 2 pins.
When I try to read things in INPA I get a red X error and if i hit dont continue or cancel It shows a yellow "stopped" status on the lower left side. If I keep hitting continue It will read everything.
Now I can get INPA to connect and read a few things. Also now when I load NCS expert and try to connect to CAS I do not get a VIN faulty anymore. I get some other weird error.
Below is the NEW error log and photo of the error in NCS that I am getting.
__________________
JB4 Stage 2 | Injen CAI | BMW PE | AR Catless DP | Alpina TCU Flash | Eibach Pro Kit | Custom TCKline Koni's | 19" M359 Wheels | DWS Tires
|