Quote:
Originally Posted by alex sol
need to manually turn the crankshaft. can i just put a e12 on one of the four bolts that hold the crank pulley or do i need the tool?
i'd like to make my own out of metal plate hex with four holes and turn with 27mm socket.
don't want to spend the money or wait for the shipping.
and want to tackle the cbu clean this weekend
|
i had some success using a 1/2" extension in the center of the 4bolts with some paper wrapped around the tip. Ultimately it was an exceptionally frustrating event and I damaged the stretch belt on install,did not survive 50 miles. Ill be ordering the proper tool before I attack the harmonic balancer, so i have better control of the crank hub for stretch belt install.
if you have the means to easily make a tool its probably time not poorly spent.