View Single Post
      05-24-2022, 01:02 PM   #1104
BimmerPost Supporting Vendor
Expert@ApexRaceParts's Avatar

Drives: M3
Join Date: Jun 2012
Location: Bay Area

iTrader: (0)

Originally Posted by minty335i View Post
Thank you for the detailed response. This is very helpful.

Would you happen to know if I can clear the rears on this set Iíve been eyeing:

Front: 19x8.5 ET +32
Rear: 19x9.5 ET +25

The front seems just fine but Iím concerned the rears will rub unless I have camber plates + roll the fenders. Both of which I have no intention of doing.

Let me know your thoughts! It is greatly appreciated.
Camber plates will only help you with front fitment, That said, while a 19x8.5" ET32 can fit just fine up front without any modifications, that 19x9.5" ET25 will be quite aggressive in the rear. Typically, we recommend running a 19x9.5" ET33 to ET35 for a direct fit on a stock car with a 265 tire. To run that same tire on a 19x9.5" ET25, you will likely need some rear negative camber or a rear fender roll.

Appreciate 0