View Single Post
      10-29-2013, 04:52 PM   #16
michbmw
Second Lieutenant
9
Rep
228
Posts

Drives: 2010 328XI
Join Date: Jul 2012
Location: Michigan

iTrader: (0)

If you've followed the pump test procedure in the Bentley to test the fuel pump and get no voltage at the connector, then the pump is probably fine. The two wires you want to check are the two heavier gauge wires, the red/white strip one and the brown one. Looks like those are the ones you checked in your pictures. That really only leaves your fuel pump module or wiring in between. If you need to replace the fuel pump module it isn't plug n play, you'll need to get it coded for your vehicle
Appreciate 0