There's a filler plug on the Lh rear of the transmission. You need to
1. remove that filler plug
2. Fill with fliud until it starts spilling out the filler plug hole
3. Put filler plug back in loosely
4. Start the engine, run it through all the gears
5. Leave engine running, put trans in neutral
6. Remove the filler plug and fill trans until the fluid starts coming out the filler hole again.
7. Refit filler plug and tighten. Job done.
I wouldn't bother worrying about loose connections just yet. The transmission fluid level has to be correct first or it will never drive properly.
|