Quote:
Originally Posted by Aperture Vision
Well, when I intially filled it, it only took three liters. I started it up and shifted through the gears and left the car running. The Bentley manual states the checking/filling process shouldnt start until the transmission is at 30 degress Celsius. So when it reached that temp I opened the fill plug and some fluid drained out. The manual goes on to say check the trans at 40 degrees Celsius and if no fluid comes out follow the fill procedure, so I did and it took almost another 4 liters before it drained. My car now shifts smoother than it ever has.
|
ok so u measured the temp of the fluid somehow? if so, i may need to do the same and some the remaining 3.5 quarts i have left....
when u shifted through the gears does it stay in them for very long...for me it was only a few seconds then defaulted back to gear 2. did this happen to u?