|
I followed this guide to try to adjust the passenger window as there is lots of wind noise.
I used a 10mm socket to lossen the locknut (1/2 turn counter clockwise). I then used the T15 bit to rotate the torx screw (about 10 turns clockwise) to adjust. It appears like it adjusted slightly.
However, when I use the 10mm to tighten the locknut, i was able to rotate it about 4 times clockwise and it still isn't tight.
Can anyone please confirm that for the E92 passenger window:
1. Locknut is counterclockwise to loosen, clockwise to tighten
2. Torx screw is clockwise to move the top of the window in towards the door
|