Quote:
Originally Posted by EvaBmw
There is a known issue with these engines where the misfire detection is incorrect. It will log a fault code for misfire cyl 6 in your case, but it will actually be a misfire in the cylinder that just fired previously, in this case cylinder 3 as the firing order is 1 5 3 6 2 4.
The Bimmerprofs website documents this problem in detail, and also has some other really good information. Try putting the new injector into cyl 3.
https://bimmerprofs.com/misfire-counters/
I was caught out by this issue with an N43. It had a misfire on cylinder 4 which turned out to be a misfire on cyl 3. A lot of time/money was wasted before i discovered this.
|
Wow that is very interesting...definitely could be the cause of my issue. I will replace Injector 4 and code it and see.
Meanwhile, I was reading where you had to reset the Adaptations on the DME AFTER you code the injectors. This was not included in any of the videos or DIY threads that I read. But, after doing so...the car runs perfectly fine now. Pretty smooth and no codes being thrown...