Hello IŽam Bern from holland. Drive a 318i e91 LCI: IŽam new to coding with BMW.
Installed, all the files with Bimmergeeks, Updated the Daten files. When I start NCS choose profil I got these possibility's, Default profile, Factory reset, feature coding, NCS Dummy profile. On al 4 the these 4 choices the vin number is not automatically red .
https://hosting.photobucket.com/imag...=278&crop=fill
So filled in. the vin code Manual. In an earlier preview, in ncs I just looked in the program but with the obd connected. Then it gave the message wrong vincode. After that I saw somewhere that I had to ad a "W" after my vincode I thought it was strange. But I still had to do in manually , always entering vincode with the W I did get into the program. Finally i was able to read FRM. changed the trc file and set bixenon_LH to active. Saved it as man file. Then written in frm. That all went well. ; at least it was coded. When I wanted to see if it worked with my bi xenon it still flickered.
https://hosting.photobucket.com/imag...=278&crop=fill
Back in NCS again had to write vin itself again and gives " vincode faulty". I don't get it anymore. Somebody Help Please, What do I do?
I also have a file "SYSDATEN.TRC" and it has a completely different vin number in it. how is that possible.
https://hosting.photobucket.com/imag...=278&crop=fill
How do I get back to factory setting and start all over. I also saw that inpa, the two black dots were gone there any more. were White.