Need a local expert on wiring
I’m planning to do a sport seat retrofit and im hoping that there’s someone in the area that would be willing to help me with wiring the new seats for full functionality.
Details of the swap:
My seats (2011 e92) are powered (non-manual) and heated with lumbar
Donor seats (also 2011 e92) are powered and heated sport package seats with lumbar and bolsters
As you can see, the swap shouldn’t be tremendously complicated but Im expecting to have no bolsters, at the very least, until I can properly wire up the connector.
I’ve had a look at some wiring diagrams and searched quite a bit on the forums but have not found this exact scenario, so I’m a little unsure of what exactly will be needed. I don’t have a ton of confidence splicing and soldering this type of equipment
Im willing to pay a reasonable amount for someone’s help with this. Im in VA and will go anywhere if it can be made into a day trip
__________________
@N52_e92 on Instagram
LCI 328i xDrive | 3-stage IM | AA catless headers | Turner Motorsport tune | 330i muffler retrofit | APEX EC-7 18x8.5 et35 square | Michelin PS A/S4 235/40-18
|