Quote:
Originally Posted by uweric5985
Problem so far:
1. Corner lights flash only once instead of three times when it's pressed.
2. Light beam focus to left side due to projector position, any way to adjust it back to center?
3. Light beam shakes up and down when driving on rough road and speed bump, is this normal?
4. High beam still can't use.
5. Lighting error still exists.
|
1) You can change the setting to flash 3 times through the bc menu in the settings section.
2)There is an adjustment for this. Look on top towards the back of the headlight housing. Do you see a + style screw hole? That will adjust it.
3) A little bit of shake is normal. How bad are we talking.
4) You need to look in the frm module and change the following to this (you should have 2 options below that line):
PWM_ANST_FL_BIXENON
wert_01
wert_01
5) You should try deleting the warm/cold check for the turn signals to see if that fixes the problem.