Quote:
Originally Posted by gjm120
Just watched that video and it shows how to change the VO. Take this with a pinch of salt, but, I think you can do a lot of coding without changing the VO. VO changes are a bit more involved than just coding. The negative of not changing the VO is that if a shop does some programming on your car the modules you've coded might revert back to the VO.
|
From what I read all I have to do after installing the mic and antenna is use NCS to select E89 for the Chassis then add $644 in VO to CAS and NFRM. Then run SG_CODIEREN to the module 2URAD to reset the radio output to match with the car setting. Sounds easy enough....