Mistakes were made. I had the *ground wire from the last ISTA pic X6454 tucked up in the injector harness (Loose but probably making contact with the VC or other metal).
I bolted the wire where it was supposed to go, and put the other ground along with it (Pretty sure they go together there.)
I tried to start the car but it sounded the same, no stumbling, no tach.
I also checked the power wires from ISTA pic #4 and they seem to be plugged in correctly.
Its still throwing the same 5 codes. Carly cant connect to the engine, says it needs to be running.
Last edited by VehementCrom; 04-04-2023 at 10:43 AM..
|