[Aus335iguy]

So, theres a link in the first post of the thread to another post from terry. It states you need....

1) A general understanding of how the JB4 and firmware updates work. If you don't know how to update firmware you probably don't have the requirements to run this. < have you updated your firmware ?
2) JB4 anti-lag working including back end flash map loaded all per the first post in this thread.< have you added the back end flash?
3) The 2STEP relay installed and generally working.<Have you installed the 2STEP relay ?
4) The firmware below which integrates the two together while under two-step. < This is the firmware you require.

I'd start at 3000-4000rpm as a set point on menu8 and evaluate from there. The anti-lag integration will probably require some additional adjustment to our 2STEP targeting logic so I'd be curious to see how it targets various set points for various turbos and flywheels.