View Single Post
      11-05-2020, 05:01 AM   #73
ccfj1
Tinkerer
ccfj1's Avatar
United Kingdom
83
Rep
534
Posts

Drives: F25 X3 M-Sport
Join Date: Jan 2012
Location: Brighton, UK

iTrader: (0)

Quote:
Originally Posted by fx27 View Post
Hi,
thank you for all you information, as I tried to retrofit an OEM camera on my 2011 E91 also.

But I have still some problems to solve and I'm not sure how to handle them.

First of all:
2011 E91 with nearly full spec
E70 TRSVC
E84 PDC
F10 camera module
X3 Retrofit cable from BMW

So these are the typical and recommended parts.

State at the moment:

I'm able to code the PDC - it's default coded.
I'm able to code my CIC - it's coded to Sangria's values.
I'm able to access the TRSVC via ISTA - no chance to default code via NCS.
I'm able to check the state of my camera via TRSVC in ISTA. - it's learned.

I'm not able to see video feed in my CIC when entering reverse gear.

The camera symbol is white and I'm able to click it, but nothing happens.

I checked the coded values several times.

I checked the wire harness, found the same fault Sangria had (white, yellow wrong), pinned them to the pins to the quadlock according to his manual (E84 white -> 18, yellow ->28, shield -> 27).

But still no success and I'm out of ideas, now.

Do you have any idea?

Thank you!
is the TRVSC module available in the UIF list?? if not then you either have

1: non e70 TRVSC module
2: not JBBR r3

You need both of these for the canbus signal to be passed to-and-from the TRVSC module
__________________
2014 F25 X3 335d M-Sport:

Appreciate 0