Quote:
Originally Posted by Jersseven
Hi Guys,
My 2008 e92 335i was recently put back to stock and now I'm having a weird issue. The car starts and drives fine but I'm getting a bunch of codes. Here's what's going on:
1. Wipers will not stop - they are on constantly and the only way to turn them off is by pulling the the key out.
2. Airbag/passive restraint system light is on cluster
3. Tire Pressure light is on cluster
4. ABS light is on cluster
5. DSC light is on cluster
6. Parking brake light is on cluster
7. Speedometer constantly reads zero.
8. SOS failure is on Idrive.
9. Stereo does not work.
At first, this was intermittent but now all the dash lights are on constantly and I can't get the wipers off.
I've taken apart the clock spring because I thought it was the steering angle sensor but it all looked fine. All the glove box fuses were checked. I'm thinking I may have a bad ground somewhere or that the battery or battery cable is bad? Maybe even a bad wheel speed sensor? I'm hoping I don't have to change the DSC module. I couldn't get any communication with the DSC module through INPA but I thought if the voltage isn't right, the module would be offline. I've also read somewhere that there's a blue relay in the DME box that might cause some of this stuff.
Here are the codes I was able to pull (MSD80):
CDAD (requirement road wheel torque drive line, BF)
CDA1 (steering wheel angle)
CD98 (torque requirement DSC dynamic stability control, B6)
CD9C (speed, 1A0)
CDA5 (status DSC dynamic stability control, 19E)
CD95 (operation cruise control/ACC active cruise control, 194)
If anyone has any tips or advice, please help.
Thanks in advance!
|
I am getting these exact codes on my wife's car. Her car was down for a couple of weeks while Module Master was repairing her abs pump / DSL module. I reinstalled the refurbished pump and bled the brakes tonight. Got in the car for a test drive and the electrical system was going crazy.
Did you ever get this fixed OP?