|
What you need to do..... connect straight to the battery.
You don't neeed to worry about a remote as the fibre optic takes care of this!
The easiest way.... what I was going to do:
> red to the battery (add a inline fuse)
> brown to a earth
> run wires to the rear shelf speakers
> run remaining wires to the front of the car (going down the passenger side - connect the rear side panel speaker.
> remove the speaker wires that plug into the Hu or CIC. Then plug them into a connector.... Run the wires to this connector ='done,
> you'll be left with the centre speaker wire, which you plug into the speaker
This way, you don't need to run the wires to each speaker, as this is already done for you (back of the hu)
Simples
|