Quote:
Originally Posted by smass
The most connector with fewer connections is storage for the prewiring.
Disassemble the most connector that has fewer connections. Shine a flashlight down the fiber and look for the light in the sat connector fiber. When you find the 2, add them to the most connector that has more connections. You will need to slide the fiber wrapped in black plastic over one slot to make room for the 2 new pieces of fiber. The fiber that runs forward in the car needs to be the first and last of the series.
|
Ok....so i found out how to take out the wiring from the box...now after i swapped around the wires i still get NO SAT reception and SAT in IDRIVE is still not highlighted. also there was NO red beam i could see from either set of wires when i flashed a light in them to look..
is there a step i missed?
