|
Question for guys who've installed the Strongflex bushings. Mine came with the metal sleeve halfway pressed into one bushing and most of the way pressed into the other one. Looks like it was done dry with no lube. Should I press them out, re-lube, press them back into the bushings, or press them out, press the bushings into the arms without the sleeves, then press the sleeves in with the lube? I suppose I should email Strongflex and ask, I don't want to mess this up.
Also do you guys lube the outside surface of the bushing before pressing into the arm? I would think you'd need to but there is not enough lube supplied to cover both. Plan on using ordinary copper grease.
|