View Single Post
      01-30-2019, 12:55 AM   #2090
Pinscher
Lieutenant
Canada
113
Rep
513
Posts

Drives: 2008 335i
Join Date: Jan 2018
Location: Vancouver

iTrader: (0)

Garage List
Hey fellas, i did the 330 conversion successfully, but me car now throws a fault code which suggesting the DME has lost communication with my transmission.

Hass said I have to get my car software updated to a newer version as it is like 1.0 before applying the 330 flash again.

To do this i need to flash back to stock and get that code out of my car or bmw won't touch it. Upon running the stock flash I'm getting the following errors


MF_NAAB_DATEI=
MF_PROGRAMM_DATEI=
MF_DATEN_DATEI=MSV80_S8608331_328i.0da
MF_DIAGNOSEPROTOKOLL=
HW interface activted.
PABD set.
P-SGBD set.
ECU-Address set.
Data and/or program and/or NAAB file set.
INFO000=Error: Error 212: Error on checking data consitency -> in data datafile (DAF)
INFO001=Error: Error 2021: Error LFCDHDIA.CPP (12msv80.IPS/IPO) CDHapiResultText 1 Datatransmission to ECU disturbed IFH-0010: Datatransmission to controlunit disturbed 12MSV80
INFO002=Error: Error 2021: Error COAPI2.CPP coapiRunCabd 6 Datatransmission to ECU disturbed SG_AIF_LESEN
INFO003=Error: Error 2021: Error COAPIKF.CPP coapiKfKonvertGetRef 1 Datatransmission to ECU disturbed
Data will be programmed.
INFO004=Error: Error 211: Error on flash programming!
INFO005=Error: Error 2089: PABD 05MSV80 Programmieren 2544 switching programming mode failed 12MSV80, DIAGNOSE_MODE (ECUPM): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO006=Error: Error 2084: PABD 05MSV80 FlashSchreiben 1448 Flash download failed 12MSV80, FLASH_SCHREIBEN (...): IFH-0010: Datatransmission to controlunit disturbed
INFO007=Error: Error 2084: PABD 05MSV80 Programmieren 3247 Flash download failed 12MSV80, FLASH_SCHREIBEN (...)
INFO008=Error: Error 2084: Error COAPI2.CPP coapiRunCabd 6 Flash download failed SG_PROGRAMMIEREN
INFO009=Error: Error 2084: Error COAPIKF.CPP coapiKfProgSgDevelop 4 Flash download failed
ERG=Programming not ok. Fatal Error
Batch mode ended
Press any key to continue . . .

I'm not sure what to do at this point.

Cable, computer and car are all the same as when i did the 330 flash, but the stock flash is not happy.

Last edited by Pinscher; 01-30-2019 at 04:12 PM..
Appreciate 0