Quote:
Originally Posted by nick380
42. Afterwards you want to open the NCSExpert application
43. Once NCSExpert has been opened hit file at the top and hit load profile. Load the Expert mode profile reference: View post on imgur.com
44. Afterwards hit F1 (VIN/ZCS/FA) View post on imgur.com
45. Then hit F3 (ZCS/FA ECU) View post on imgur.com
46. Will ask you to choose Chassis, be sure to choose "E89"
47. Then Select "CAS" from the "Choose ECU" menu
48. Once it has been selected it will take you back to the main menu, but this time it should read E90(E89) for "CHASSIS" and the "FG" you should see your car's VIN. Pic: View post on imgur.com
49. Press F2 to enter the FA or Vehicle Order of the car there you will see a menu with chassis again choose E89 now it will ask if the vin is correct, it should auto populate with your vin if yes then hit okay and it will take you to a FA screen with all the options your car as on it. Remove S205A AUTOMATIC TRANSMISSION by clicking it and hitting delete key.
50. Press F6 or the back button, then hit F4 for ECU and select CAS and then okay
51. F2 to change job, from the pop uip window select FA_WRITE. and press okay
52. Verify all the information is correct (Right module, and jobname is FA_WRITE) then hit F3 to execute the job should be pretty quick
53. After the write has been complete press F1 to change ecu and select "FRM" go ahead and verify module and jobname once more and hit F3 to Execute the job on the FRM (Fussraum Module) (Footwell module)
54. After coding has ended. Exit NCS Expert and proceed to start Car! |
Thanks for posting! I am about to tackle this on my xi.
Did you ever get cruise control to work?
I noticed that in your steps, you changed the VO, but you never defaulted the coding. The coding should be defaulted in the DME, DSC, and Kombi modules at the very least. Ideally, you should default the coding in the entire car. Lack of doing this is probably why cruise control does not work. It's probably also the reason why you could not start the car. Does pressing the brake in, instead of the clutch, start the car? (With cas pins not jumped)
Also, the VO is redundantly stored in the FRM so the VO should be written to the FRM as well.