Quote:
Originally Posted by omaragha
Should I turn the filters off, asumption that the MS8 shoudl do this work ?
|
You answered your question.
Quote:
Originally Posted by omaragha
Ok, update.
Ive set the MS8 up with teh following:
FL+FR 1 way 150HZ 24db
Center 1 way 150Hz 24db
SL+SR 1 way 150Hz 24DB
Sub1&2 30hz 12 db
I have some great staging across the front now but find the subs very 'boomy' and the fronts mids are struggling as they pop. Not sure what is the RMS for a Logic 7 mid ? I have 100 RMS going to fronts with the AMP gain turned down to a third but they still pop.
Set the MS8 up at -30 and now have it at -6. Head Unit was set to about 42 clicks at calibaration.
Any ideas or is it a case of the Logic 7 mids now not keeping up ?
|
L7 mids are 75W RMS. So don't push them more than that.
I guess you are referring 30Hz as subsonic filter. (correct me if I am wrong).
You will get better sound if you setup front / subs at 120hz @24db,
BUT be careful when you set your gains on your speakers.
I would set the gains of amp to 20% and let MS-8 do its job.
HTHs.
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play