HI guys,
i dont know why,but i tried to retrofit the SSG ones from 335 onto my 330i and it doesnt work
The steering came with the multifunction buttons where there are slots to plug the paddles ,I have 6 pins on the connector which goes to the slipring ,thats why i think i dont need to use additional cables like shown in this pic:
Then i removed the connector at the back of the slip ring and since i had all pins i cut #2 and #4 and connected them with a wire that goes to the blue connector under the shift lever.
Then connected the wires from the slipring to the blue connectors under the gear lever but the paddles doesnt work .
Any help is appreciated